|
Product Details:
|
| Charge Voltage: | 4-8S | Charge Current: | 150A |
|---|---|---|---|
| Over Charge Volt: | 3.65±0.05 | Over Charge Volt Protect Delay: | 1 |
| Over Charge Volt Release: | 3.65±0.05 | Constant Discharge Current: | 150A |
| Active Balanceing: | 2A | ||
| Highlight: | 8s battery management system bms,10s battery management system bms,12s battery management system bms |
||
☆Package
BMS{Bluetooth bulit-in}
* Temperature sensor(40cm)
* Balance Wires(75cm)
* Active Switch(15cm)
*Heating cable(Only for BMS With Heat Function)
H:BMS With Heat Function
C:BMS With CANBUS chip Bulit-in
NOTE: For instructions on heating cables,
the green 5PIN cable of the heating cable needs to be linked to the heating pad,
and the rest of the black and red cables are linked to the smart charger
(after the smart charger links the BMS,
it detects the temperature of the battery through the BMS,
which automatically monitors the charging status of the battery)
Heat Function interface
Description of heating function:
Battery temperature is below low temperature charge protection, turn off charging, turn on heating.
Cryogenic charge protection is a parameter that can be set within APP
Contact Person: Leo Zeng
