|
Product Details:
|
Input Voltage Range: | AC 90~265V | Input Current: | 16A |
---|---|---|---|
Output Rated Voltage: | 48V/72v/84V/96V/144V/312V | Max Charging Voltage: | 66V |
Max Output Current: | 5-45A | Power Factor: | ≥0.99 Half Load |
Efficiency: | ≥93% Full Load | Model Number: | S2-6.6KW |
IP: | IP66 | Application: | Motorcycles/boats/surfboards |
Net Weight: | 12kg | Single Package Size: | 420*294*111 |
Highlight: | 6.6KW EV Battery Charger With Fan,IP66 6.6KW EV Battery Charger,IP66 6.6KW electric car battery charger |
large Car battery charger for lithium ion battery with fan 6.6KW IP66 waterproof
Car battery charger lithium battery charger introduction
Wide voltage option
Besides 220V,110V fixed input voltage,this S2 car charger is available with wide range of input voltage
Input voltage range |
Input current |
Output Rated voltage |
Max charging voltage |
Max chargingcurrent |
Power factor |
Efficiency |
AC 90~265V |
≤ 16A |
48V |
58.8V | 45A |
≥0.99
Half load |
≥93%
Full load |
72V | 99V | 40A | ||||
84V | 116V | 40A | ||||
96V | 132V | 32A | ||||
144V | 198V | 23A | ||||
312V | 440V | 10A |
Electrical parameters
Input |
Frequency rate |
45-65Hz |
Standby power consumption | ≤ 5W | |
Main output |
Output type | Constant pressure/current |
Output power |
3300W@220VAC,2800W@110VAC 2650W@90-265VAC
6600W@220VAC,5600W@110VAC 5280W@90-265VAC |
|
CV Accuracy | ±1% | |
CC Accuracy | ±1% | |
Ripple voltage coefficient | 5% | |
Low voltage output |
Output type | CV |
Output voltage | 13.8V | |
Rated current | 5A | |
Precision of constant voltage | ±2% | |
Max current | 5.5A±0.5A | |
Output power | ≥ 62.5W | |
Ripple voltage coefficient | 1% | |
CAN Communication |
CAN communication | Optional |
Baud rate | 125Kbps,250Kbps,500Kbps | |
Terminating resistor | No |
Protection function
Protection
|
Input over-voltage protection | AC264V |
Input under-voltage protection | AC90V | |
Output over-voltage protection | Yes | |
Output start voltage | 0.3 times rated voltage | |
Output over-current protection | Yes | |
Over temperature protection |
Power down from 85℃, shut off At 90 ℃ |
|
Short circuit protection | Stop output | |
Reverse battery protection | Stop output | |
Ground protection | ≤ 100mΩ | |
C A N Communication protection | Automatically stop output when CAN communication fails | |
Power failure protection | Yes |
Safety specifications and others
Withstand pressure |
Input to output:2000VAC≤ 10mA ,Input to ground:2000VAC≤ 12mA Output to ground:2000VAC≤ 10mA,All are 1 minute |
Insulation resistance | Input, output, signal end to shell ≥ 10MΩ ,Test voltage 1000VDC |
Electromagnetic immunity | Satisfy GB/T 18487.3-2001 11.3.1 |
Electromagnetic disturbance | Satisfy GB/T 18487.3-2001 11.3.2 |
Harmonic current | Satisfy GB 17625.1-2003 6.7.1.1 |
Current rise time | ≤ 5S,Overshoot ≤ 5% |
Off response time | 100% to 10%≤ 50mS,100% to 0%≤ 200mS |
Protection level | IP66 |
Vibration resistance | 10-25Hz Amplitude 1.2mm,25-500Hz 30m/s2, each direction 8 hours |
Noise | ≤ 60dB(Class A) |
MTBF | 150000H |
Working environment | Relative temperature 5% -95% without condensation |
Operating temperature | -20℃ ~ +85℃ |
Storage temperature | -30℃ ~ +90℃ |
Shape and size
combination of 2 3.3KW battery charger
6.6KW Air cooling
Horizontal mounting size within S2-6.6KW
Connector type
Indicator status definition
7.1 No alarm
a. Charging operation status: The red light flashes at 1s intervals, and the green light is off.
b. Heating operation status: The green light flashes at 1s intervals, and the red light is off.
c. Waiting state: The green light is always on and the red light is off.
7.2 With alarm
a. Hardware failure or DC12V failure: red,green, , , , .
b. PFC, CC & CP slave CPU communication failure:
red,green,red, , , .
c. DC bus voltage failure: red,green,red,green, , .
d. Low or high AC voltage protection: red,green,red,green,red, .
e. Battery is not connected: red,green,red,green,red,green.
f. Segment charge timeout protection: red, , ,red, , .
g. Battery temperature protection: red, , ,red, , .
h. CPU temperature or transformer temperature protection:
green,red,green, , , .
i. Output short-circuit protection: green,red,green,red, , .
j. Transformer primary overcurrent protection:
green,red,green,red,green, .
Product appearance
(1) The outer surface should be flat, without obvious defects such as scratches and deformation. The surface coating should be uniform.
(2) The nameplates and signs are firmly installed and the handwriting is clear.
(3) The parts and components shall be fastened and reliable, and shall be free from defects and damages such as rust, burr and cracks.
(4) Each product shall be marked with a product logo, including part number, product trademark, product model, production number, production company name, warning instructions, etc., at obvious locations.
Packaging, transportation and storage
Packaging: Product name, model, specification, name of manufacturer are printed on the label . The box contains the product manual.
Transportation: It is suitable for transportation by car, boat and airplane. It should be protected from sun, moisture and civilized transportation during transportation.
Storage: When the product is not in use, it should be stored in a packing box. It should be kept in a clean, dry and well-ventilated environment at 5 ℃ ~ 40 ℃. Avoid exposure to sunlight, fire and water. The product has a shelf life of 2 years (from the manufacturer,from the date of storage), if the storage time is too long (more than 2 year), it should be tested by professional before use.
BMS: CAN BUS COMMUNICATION SPECIFICATION
The principle for data link layer.
Communication speed for bus line: 250Kbps.
The provision for data link layer: Refer to the related regulation of CAN2.0B and J1939.
Use and redefine 29 identifiers of CAN extended frame. The distribution of 29 identifiers are listed below:
IDENTIFIER 11BITS |
S R R |
I D E |
IDENTIFIER EXTENSION 18BITS |
||||||||||||||||||||
PRIORITY |
R |
DP |
PDU FORMAT(PF) |
S R R |
I D E |
PF |
PDU SPECIFIC(PS) |
||||||||||||||||
3 | 2 | 1 | 1 | 1 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | ||||
28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 |
Priority has 3 bits so there can be 8 priorities. R is generally 0. DP is fixed at 0. 8-bit PF is the code for the message. 8-bit PS refers to destination address. 8-bit SA refers to the source address.
›There is a name and an address for every node which accesses to the network. The name is used for nodes identification and address arbitration. The address is used for data communication to node.
›Every node has at least one function. Multiple nodes might have the same function or one node might have multiple functions.
What is car battery charger?
How many amps do I need to charge a 12 volt battery?
Most battery manufacturers recommend sizing the charger at about 25% of the battery capacity (ah = amp hour capacity). Thus, a 100 ah 12 volt battery would take about a 25 amp 12 volt charger (or less).
Where is the best car battery charger to buy?
About the Transportation&Delivery
1. Shippment to USA:By sea+Express(DDP,Tax free)
ETD:5-8 days
ETA:25-35 days after sailing(This is the delivery time for most orders. Please wait patiently or contact us online)
The tracking will be updated after pick up by local express.Usually it will take around 15-25 days after sailing.
2. Shipment to EU:By railway+Express(DDP,Tax free).Except Switzerland,Romania
ETD:5-8 days
ETA:30-45 working days after shipping(This is the delivery time for most orders. Please wait patiently or contact us online)
The tracking will be updated after pick up by local express.Usually it will take around 25-40 working days after shipping.
3. We can't deliver the following address directly:
USA: Military address and PO box address are not acceptable;
Puerto Rico, Virgin Islands, Guam, Alaska Note: Hawaii does not include customs duties and requires additional freight, Please contact us online.
Portugal: Azores and Madeira
Spain:Canary Islands, hueda and melilia
Russia: Kamchatka Peninsula
Other:Some remote areas not listed,Please provide shipping address and zip code to to us to check.
About US
Changsha Deligreen Power Co.LTD,founded in 2010,is a "Green Energy Solution Service Provider".
Newest technology,new idea,heard-working and honest people.
Focus on lithium rechargeable battery,BMS,Balancer,charger and relative products.
Main application:electric bicycle,scooter,motorhome,AGV,solar/wind system,Energy storage system,truck and so on.s:
We promise"real"lithium capacity
We promise“100%“ refund for any quality problem
We promise”100%“ replacement for any shipping damage
We promise lifetime fast technical supportCustomers‘ satisfaction is our endless pursuing.
FAQ
Contact Person: Leo Zeng